130 Client Application C2631M-A (6/07)
1 ips in the Normal record mode when an alarm event occurs, video is recorded at 1 ips during the pre-event time period. After the pre-event time
period expires, the recording rate switches to the frame rate configured for the event.
To schedule a record mode for one or more channels:
1. From the DX8100 toolbar, click . The Setup dialog box opens to the Camera page.
2. Click . The Schedule page is displayed.
3. Click the check box for the record mode you want to apply to a channel.
•Normal
•Motion
•Alarm
•ATM/POS
The following table describes the record modes.
4. Click and drag the mouse to highlight the time periods and channels where you want the recording mode to apply.
Drag the mouse diagonally to highlight periods across multiple camera channels simultaneously.
5. Click Apply.
Figure 112. Filling In Recording Blocks in a Schedule Grid

Clearing a Scheduled Recording

The DX8100 Schedule feature allows you to do the following:
• For one or multiple channels, clear the scheduled recording times for a specific record mode. You can select one channel or you can drag
and select a group of channels. For example, you can select and drag the recording times for channel 1-32. However, the system does not
allow you to select random channels from the list. For example, you are not allowed to select channel 1, 2, and 4 (excluding camera 3).
• For one or multiple channels, you can clear the scheduled recording times for all record modes simultaneously.
• You can select and clear recording times periods in increments of 30 minutes to 24 hours.
This section describes how to clear a scheduled recording and includes the following sections:
•Clearing Recording Times for a Specific Record Mode
•Clearing Recording Times for All Record Modes
Table AC. Record Modes
Mode Color Description
Normal Green Continuous recording.
Motion Blue Recording is triggered during the selected time block if a motion event is detected in the camera’s predefined
motion field. For information on motion detection, refer to Motion Detection Setup.
Alarm Red Recording is triggered during the selected time block when an alarm is activated. At least one alarm must be
linked to the camera for this option to work. For information on alarms, refer to Linking Alarm Inputs to a
Camera.
ATM/
POS
Yellow Recording is triggered during the selected time block if an ATM or POS event is detected in the camera’s
predefined ATM/POS field. For information on ATM/POS detection, refer to Linking Cameras to Record in
Response to ATM/POS Events.