60 Client Application C2631M-A (6/07)
6. Move the camera through a series of movements using the on-screen PTZ and focus controls.
Figure 38. Programming a Pattern
Stop Programming a Pattern
To stop programming a pattern:
1. On the DX8100 keypad, click .
2. Click .
ACTIVATING A PATTERN
When activated, a pattern will repeat indefinitely until it is cleared, another pattern is set, or the on-screen PTZ control is moved.
To activate a pattern:
1. On the DX8100 keypad, click a pattern number (1-4) on the keypad.
2. Click .
Figure 39. Activating a Pattern
CLEARING A PATTERN
To clear a pattern:
1. On the DX8100 keypad, click to enter programming mode.
2. Select a pattern number (1-4) on the keypad.
3. Click .
4. Click .
5. Click again.