Pelco C2631M-A REMOVING LINKS

44 Client Application C2631M-A (6/07)
REMOVING LINKS
This section describes how to remove links and includes the following sections:
•Removing a Linked Alarm Input from a Camera
•Removing a Linked Relay Output from a Camera
•Removing a Linked Relay Output from an Alarm Input
Removing a Linked Alarm Input from a Camera
To remove an alarm link from a camera:
1. On the DX8100 toolbar, click .
2. In the Site tree, click the plus sign (+) next to the camera from which you want to remove an alarm input.
3. Left click and drag the alarm outside the Site tree panel, and then release the mouse button.
4. Repeat the above process for each alarm you want to remove.
Removing a Linked Relay Output from a Camera
To remove a relay link from a camera:
1. On the DX8100 toolbar, click .
2. In the Site tree, click the plus sign (+) next to the camera from which you want to remove the relay output.
3. Left click and drag the relay outside the Site tree panel to the DX8100 toolbar or panel (above or below the Site tree panel), and then
release the mouse button.
4. Repeat the above process for each relay you want to remove.
Removing a Linked Relay Output from an Alarm Input
To unlink a relay from an alarm:
1. On the DX8100 toolbar, click .
2. In the Site tree, click the plus sign (+) next to the alarm input from which you want to remove the relay output.
3. Left click and drag the relay outside the Site tree panel, and then release the mouse button.
4. Repeat the above process for each relay you want to remove.