Chapter 4 — Enabling and Configuring Symbologies

Configuring the Code 93 Options

Scan the following bar codes to configure the Code 93 options.

Minimum Label Length

You can set the Minimum Label Length.

Note: For this symbology, the scanner decodes up to 50 characters, but the actual length read varies depending upon interface type, bar code physical size, and print quality. The IBM POS interface is limited to 32 character labels. Code 93 bar codes containing one or more shift characters can also limit the amount of characters that are decoded; in these circumstances, the scanner decodes at least 39 data characters.

To set the Minimum Label Length

1Identify the minimum length setting you want to make. The selectable range is 01 to 50 characters.

2Scan the SET bar code on page 113.

3Scan the Set Minimum Label Length bar code.

4Using the Digits bar codes on page 114, scan the digits to set the minimum label length you identified in Step 1. The range is 01 to 50 characters.

Note: To set a label length less than ten, you must scan a zero digit first and then the length digit (such as 04, 06, or 08).

5Scan the END bar code.

SET ------------------------------------------

Set Minimum Label

Length---------

SR60 Scanner Programmer’s Reference Manual

113

Page 125
Image 125
Intermec SR60 manual Configuring the Code 93 Options, To set the Minimum Label Length