Intermec SR60 manual PC Keyboard Interface Selection, PC Keyboard Interfaces and Cables Supported

Chapter 2 — Configuring Interface Settings

PC Keyboard Interface Selection

The SR60 scanner supports a variety of PC keyboard interfaces. Find your PC Keyboard Interface in the first column and note the corresponding Interface Type in the second column.

For your convenience, the third column lists the corresponding cable or cables you can use to connect the SR60 scanner.

PC Keyboard Interfaces and Cables Supported

	Interface
PC Keyboard Interface	Type	Cable(s)
PC/XT with alternate key encoding	A	P/N 321-635-001
AT, PS/2 25-286, 30-286, 50, 50Z,	B	P/N 321-635-001
60, 70, 80, 90, and 95 with alternate		P/N 321-636-001
key encoding
PS/2 25 and 30 with alternate key	C	P/N 321-635-001
encoding		P/N 321-636-001
PC/XT with standard key encoding	D	P/N 321-635-001
AT, PS/2 25-286, 30-286, 50, 50Z,	E	P/N 321-635-001
60, 70, 80, 90, and 95 with standard		P/N 321-636-001
key encoding
PS/2 25 and 30 with standard key	F	P/N 321-635-001
encoding		P/N 321-636-001
PS/55 5530T with 104 keyboard	I	P/N 321-635-001
		P/N 321-636-001

Intermec recommends that you disconnect power before plugging or unplugging cables to avoid any possibility of equipment damage.

Scan the following bar codes to select the interface type you identified from the previous table, “PC Keyboard Interfaces and Cables Supported.”

SR60 Scanner Programmer’s Reference Manual 31