Chapter 4 — Enabling and Configuring Symbologies
2Scan the SET bar code on page 87.
3Scan the Enable Fixed Length Format bar code.
4Scan the Set First Fixed Length bar code.
5Using the Digits bar codes on page 88, scan the digits to set the first fixed label length. The length must be an even number.
Note: To set a label length less than ten, you must scan a zero digit first and then the length digit (such as 04, 06, or 08).
•If you need to set a second fixed length, continue with Step 6.
•If you do not need to set a second fixed length, scan the No Second Fixed Length bar code and skip to Step 8.
6Scan the Set Second Fixed Length bar code.
7Using the Digits bar codes on page 88, scan the digits to set the second fixed label length.
Note: To set a label length less than ten, you must scan a zero digit first and then the length digit (such as 04, 06, or 08).
8Scan the END bar code.
Fixed Length Format
SET
Enable Fixed Length
Format---------
SR60 Scanner Programmer’s Reference Manual | 87 |
