Intermec SR60 manual Sample B

Chapter 1 — Introduction to Programming the SR60 Scanner

The term Item Tag describes an assigned number encoded in a programming bar code that selects, enables, or disables a specific feature.

3Exit Programming mode and reset the scanner with the END bar code.

SETITEM TAG ITEM VALUE END/RESET

A	1		2	3
			ENABLE
	SET	NEW FEATURE		END

	1			2				3	4	5	6
							0
B			ENABLE NEW
							0
						FEATURE
					USING THE
				FOLLOWING
		SET		SETTINGS...			8					END
C							1
	ONE BAR CODE CONTAINS SET + ITEM TAG + ITEM VALUE + END

Three Sample Programming Sequences

Sample B

Programming sample B demonstrates how to enter a range value.

SR60 Scanner Programmer’s Reference Manual 5