Chapter 4 — Enabling and Configuring Symbologies
4Scan the Set Minimum Label Length bar code.
5Using the Digits bar codes on page 88, scan the digits to set the minimum label length you identified in Step 1.
Note: To set a label length less than ten, you must scan a zero digit first and then the length digit (such as 04, 06, or 08).
6Scan the END bar code.
Variable Length Format
SET
Enable Variable Length
Format---------
Set Minimum Label
Length---------
END
Fixed Length Format
All interfaces that are shipped with the standard factory configuration are set to read variable length labels. If you switch from the variable to fixed length format, the default label lengths are 14 characters and 8 digits. All fixed length settings must be an even number.
To set Interleaved 2 of 5 Fixed Length Format
1Identify the fixed length settings you want to make.
86 | SR60 Scanner Programmer’s Reference Manual |
