Chapter 4 — Enabling and Configuring Symbologies
Note: For this symbology, the scanner decodes up to 50 characters, but the actual length read varies depending upon the interface type, bar code physical size, and print quality.
•The Enable Variable Length Format bar code on page 95 directs the scanner to read all labels from minimum label length to 50. If you select variable length format, there is one more bar code label to scan:
•The Set Minimum Label Length bar code on page 95 selects the minimum label length that the scanner will recognize. The minimum label length for this symbology must be between 03 and 50. Set the Minimum Length as high as your application allows.
•The Enable Fixed Length Format bar code on page 96 directs the scanner to read only one or two label lengths. If you select fixed length format, there are three bar code labels for programming your scanner to read either one or two fixed lengths. The labels are:
•The Set First Fixed Length bar code on page 96 instructs the scanner that the next two programming labels scanned will define the first fixed label length. This setting must be between 03 and 50 characters.
•The Set Second Fixed Length bar code on page 96 instructs the scanner that the next two programming labels scanned will define the second fixed label length. This setting must be between 03 and 50 characters.
•The No Second Fixed Length bar code on page 97 configures the scanner to recognize only the first fixed length.
Start/Stop Characters
Start/Stop Characters can be either Send or Don’t Send depending on your host’s interface requirement. Refer to your host user’s manual to identify your system requirements.
Start/Stop Match
Start/Stop Match can be enabled or disabled.
92 | SR60 Scanner Programmer’s Reference Manual |
