Intermec SR60 manual Setting Global Suffixes, To set global suffixes

Chapter 3 — Configuring Label Transmit Settings

You have added a two-character prefix to all bar code data, regardless of label symbology. The prefix will be added to the label data before it is sent to the host.

Setting Global Prefix(es)

SET -------------------------------------------

Set Prefix---------

Use the ASCII chart on page 158 to identify the ASCII character(s) and the corresponding hex code(s) for the prefix. Then use the bar codes on page 154 to scan the four digits corresponding to the hex values.

END ------------------------------------------

Setting Global Suffix(es)

You may add one or two suffix characters to the standard label format. To add more than two suffix characters, contact Intermec Product Support for Full Label Edit (FLE) options.

To set global suffixes

1Identify your specific system requirements.

2Using the ASCII chart on page 158, identify the ASCII character(s) and the corresponding hex code(s) for the ASCII characters you plan to use as suffixes.

For example, suppose you want to send the two suffix characters LF (Line Feed) and CR (Carriage Return). The ASCII chart shows that LF equals 0A hex and CR equals 0D hex.

50 SR60 Scanner Programmer’s Reference Manual