Chapter 4 — Enabling and Configuring Symbologies
END
Label Length Format
The next two sections let you set the Standard 2 of 5/IATA label length format to either Variable Length or Fixed Length format.
Variable Length Format
You can set the Standard 2 of 5/IATA symbology to read Variable
Length Format.
Note: For this symbology, the scanner decodes up to 50 characters, but the actual length read varies depending upon the interface type, bar code physical size, and print quality.
To set Standard 2 of 5/IATA symbology to read Variable Length Format
1Identify the minimum length setting you want to make. The selectable range is 02 to 50 characters.
2Scan the SET bar code.
3Scan the Enable Variable Length Format bar code.
4Scan the Set Minimum Label Length bar code.
5Using the Digits bar codes on page 122, scan the digits to set the minimum label length you identified in Step 1.
Note: To set a label length less than ten, you must scan a zero digit first and then the length digit (such as 04, 06, or 08).
6Scan the END bar code.
Variable Length Format
SET
SR60 Scanner Programmer’s Reference Manual | 119 |
