Chapter 4 — Enabling and Configuring Symbologies

length to 16. If you select variable length format, there is one more bar code label to scan:

The Set Minimum Label Length bar code on page 128 selects the minimum label length that the scanner will recognize. The minimum label length for this symbology must be between 04 and 16. Set the Minimum Length as high as your application allows.

The Enable Fixed Length Format bar code on page 129 directs the scanner to read only one or two label lengths. If you select fixed length format, there are three bar code labels for programming your scanner to read either one or two fixed lengths. The labels are:

The Set First Fixed Length bar code on page 130 instructs the scanner that the next two programming labels scanned will define the first fixed label length. This setting must be between 04 and 16 characters.

The Set Second Fixed Length bar code on page 130 instructs the scanner that the next two programming labels scanned will define the second fixed label length. This setting must be between 04 and 16 characters.

The No Second Fixed Length bar code on page 130 configures the scanner to recognize only the label length chosen as the first fixed length.

Read Verification

Read Verification is the number of times the scanner is required to read the bar code data before sending the label data to the host.

Configuring the MSI /Plessey Options

Scan the following bar codes to configure the MSI/Plessey symbology options.

Check Digit

SET ------------------------------------------

126

SR60 Scanner Programmer’s Reference Manual

Page 138
Image 138
Intermec SR60 manual Configuring the MSI /Plessey Options, Read Verification