Intermec SR60 manual Enabling and Configuring Symbologies

Chapter 4 — Enabling and Configuring Symbologies

•The Enable Code 128 bar code on page 69 selects Code 128 as an active symbology. The scanner is preset to recognize all Code 128 bar codes that have between 1 and 50 characters.

•The Enable UCC/EAN 128 bar code on page 69 chooses EAN 128 as an active symbology. The Automatic Identification Manufacturers, Inc. of the United States (AIM U.S.A.) have standardized the reporting of data sources from bar code reading devices. Sending the AIM symbology prefix identifies the symbology to the host terminal, allowing it to specifically differentiate between UCC/EAN-128 (Code 128 with Function Character 1 in the first position) and standard Code 128 symbols. When this feature is disabled, the host cannot differentiate between these symbols.

•The Enable Interleaved 2 of 5 bar code on page 69 selects Interleaved 2 of 5 as an active symbology. Allows change of check digit or label format (fixed or variable length) options.

•The Enable Codabar bar code on page 69 selects Codabar as an active symbology. Allows selection of check digit, start/ stop character and format, or label format (fixed or variable length) options.

•The Enable UPC-A bar code on page 69 enables UPC-A as an active symbology. If you enable this symbology, additional options for symbology expansion and reading add-ons are available.

•The Enable UPC-E bar code on page 69 tells the scanner to recognize UPC-E as an active symbology. Like UPC-A, UPC- E offers options for symbology expansion and reading of add- ons.

•The Enable EAN-13 bar code on page 70 selects EAN-13 as an active symbology. EAN-13 options are similar to those of the EAN-8 symbology.

•The Enable EAN-8 bar code on page 70 selects EAN-8 as an active symbology. EAN-8 symbology selection also allows options for symbology expansion and reading of add-ons.

•The Enable Code 93 bar code on page 70 enables Code 93 as an active symbology. The scanner is preset to recognize all Code 93 bar codes that have between 1 and 50 characters.

SR60 Scanner Programmer’s Reference Manual 67