Intermec SR60 manual To set the number of minimum reads, Read Verification

Chapter 4 — Enabling and Configuring Symbologies

Enable 5-Digit---------

Enable Euro 4-Digit ---------

Enable Euro 5-Digit ---------

END ------------------------------------------

Read Verification

You can set the number of minimum reads required to verify

UPC/EAN symbologies.

To set the number of minimum reads

1Scan the SET bar code.

2Scan a bar code to select which symbology to verify.

3Scan the bar code on page 111 that represents the number of times you wish a bar codes label of that symbology type to be read before transmission to the host from the list.

4Repeat Steps 2 and 3 until read verification has been modified for each symbology you enabled.

5Scan the END bar code.

110 SR60 Scanner Programmer’s Reference Manual