Manuals / Intermec / Computer Equipment / Scanner

Intermec SR60 About UPC/EAN Options, Data Format Settings, UPC/EAN Expansion, UPC/EAN Add-ons

Models: SR60

1 174

Download 174 pages 54.63 Kb

Page 113

Chapter 4 — Enabling and Configuring Symbologies

UPC/EAN Options

This section describes the UPC/EAN options and contains the programming bar codes you can use to configure those options.

About UPC/EAN Options

The UPC/EAN symbologies have the following programmable features:

•Data Format Settings

•UPC/EAN Expansion

•UPC/EAN Add-ons

•Price/Weight Check Digit

•Read Verification

Data Format Settings

UPC/EAN Data Format Settings provides options for transmitting check digits or Number System Digits (NSD).

UPC/EAN Expansion

Expand UPC-A to EAN-13 adds a leading zero to a UPC-A label which expands the label to the EAN-13 data format. Selecting this feature also changes the symbology ID to match those required for EAN-13.

Expand UPC-E to UPC-A expands UPC-E labels to UPC-A data format. Selecting this feature also changes the symbology ID to match those required for UPC-A.

Expand EAN-8 to EAN-13 adds five zeros in front of an EAN-8 label. Data is sent in EAN-13 data format. Selecting this feature also changes the symbology ID to match those required for EAN- 13.

Expand UPC-E to EAN-13 expands UPC-E labels to EAN-13 data format. Selecting this feature also changes the symbology ID to match those required for EAN-13.

UPC/EAN Add-ons

UPC-A or UPC-E and EAN-8 or EAN-13 Two and Five Digit

Add-ons filters:

•Required means UPC/EAN bar codes must have add-ons or label will not be read.

SR60 Scanner Programmer’s Reference Manual

101

Image 113

Intermec SR60 manual About UPC/EAN Options, Data Format Settings, UPC/EAN Expansion, UPC/EAN Add-ons

Contents

Programmer’s Reference Manual SR60 ScannerIntermec Technologies Corporation Corporate Headquarters Contents 1 Introduction to Programming the SR60 ScannerContents SR60 Scanner Programmer’s Reference ManualRS-232 Interface/WN-RS-232 SNI Interface ContentsSR60 Scanner Programmer’s Reference Manual Contents4 Enabling and Configuring Symbologies Label Length Format Start/Stop Characters Start/Stop Match ContentsSR60 Scanner Programmer’s Reference Manual ContentsSR60 Scanner Programmer’s Reference Manual Contentsviii Warranty Information Global Services and SupportSupport Warranty Before You BeginTelephone Support Who Should Read This Manual 2 Click Service & Support ManualsRelated Documents To download documentsSR60 Scanner Programmer’s Reference Manual Before You Begin1 Introduction to Programming the SR60 Scanner Customizing Your Scanner’s Operation How to Program the SR60 ScannerWhat is a Programming Session? What Is Programming Mode?Sample A Three Sample Programming SequencesSample B Roadmap for Programming the Scanner About the Scanner LEDs and BeeperSample C To program the scannerScanner Beeper Integrating the Scanner With Your Host SystemScanner LEDs Verifying that Your Scanner Supports the Interface Changing the Interface CableRemoving and Replacing the Scanner Interface Cable To change the scanner interface cableRemoving and Replacing an Interface Cable Reconfiguring the Interface SettingsTo restore factory defaults Restoring Factory Default SettingsTrouble Scanning the Bar Codes in This Manual SR60 Scanner Programmer’s Reference Manual Chapter 1 - Introduction to Programming the SR60 ScannerWand Emulation Interface Wand Emulation Settings 2 Configuring Interface SettingsRS-232 Interface/WN-RS-232 SNI Interface RS-232 Communication Parameters Keyboard Wedge InterfaceWand Emulation Interface Wand Emulation SettingsSignal Speed Chapter 2 - Configuring Interface SettingsData Format SR60 Scanner Programmer’s Reference ManualEnable Disable Chapter 2 - Configuring Interface SettingsIdle State Transmit C128 Function CharactersTo set pre-noise or post-noise transitions Wand Emulation Pre/Post-Noise SettingsTo disable transmitting pre-noise or post-noise transitions END Post-Noise Transitions Settings SET Chapter 2 - Configuring Interface SettingsDon’t Transmit Post-Noise Set Post-Noise Transitions SR60 Scanner Programmer’s Reference ManualRS-232 Communication Parameters RS-232 Interface/WN-RS-232 SNI InterfaceBaud Rate Chapter 2 - Configuring Interface Settings Data Format SettingsSET Data Bit SR60 Scanner Programmer’s Reference ManualParity Bit Chapter 2 - Configuring Interface SettingsStop Bits None Even Odd Mark SpaceHardware Handshaking HandshakingCTS Scan Control Illustration Enable CTS/RTS Flow Control SETSoftware Handshaking Enable XON/XOFF Control SET Chapter 2 - Configuring Interface SettingsEND Disable both CTS/RTS and XON/XOFF Control SET Step #1 Step #2RS-232 ACK/NAK Options To disable either CTS/RTS Control or XON/XOFF ControlChapter 2 - Configuring Interface Settings RS-232 Intercharacter DelayEnable for Bar Code Transmission Enable for Host Command Acknowledge Enable for Bar Code Transmission and Host Command AcknowledgeSR60 Scanner Programmer’s Reference Manual Chapter 2 - Configuring Interface Settings10 Milliseconds 20 Milliseconds 30 Milliseconds 40 Milliseconds 50 Milliseconds 100 Milliseconds 200 Milliseconds500 Milliseconds 1 Second Keyboard Wedge InterfacePC Keyboard Interfaces and Cables Supported PC Keyboard Interface SelectionPC Keyboard Interface Type SET Chapter 2 - Configuring Interface SettingsA B C D E SR60 Scanner Programmer’s Reference ManualConnect to a Laptop or PC and Send Control/Function Characters Right Tab HT=09h Left Tab 0Bh Esc 1Bh Caps Lock Chapter 2 - Configuring Interface Settings Country ModeBelgium Britain Denmark France Germany Italy Japanese 106-Key Norway Caps Lock Off Caps Lock On Caps Lock = Shift-LockPortugal Spain Sweden Switzerland U.S.A Chapter 2 - Configuring Interface SettingsScan the following bar codes to select the desired country SR60 Scanner Programmer’s Reference ManualSR60 Scanner Programmer’s Reference Manual Chapter 2 - Configuring Interface SettingsGermany Italy Japanese 106-Key Norway Portugal Spain Sweden Chapter 2 - Configuring Interface Settings Intercharacter DelaySR60 Scanner Programmer’s Reference Manual Switzerland U.S.A10 Milliseconds 20 Milliseconds 30 Milliseconds 40 Milliseconds Chapter 2 - Configuring Interface Settings60 Milliseconds 80 Milliseconds 90 Milliseconds SR60 Scanner Programmer’s Reference ManualChapter 2 - Configuring Interface Settings Quiet IntervalSR60 Scanner Programmer’s Reference Manual 10 Milliseconds 20 Milliseconds 50 Milliseconds 100 MillisecondsUSB Interface Chapter 2 - Configuring Interface Settings Keyboard Country Code for USB InterfaceEnable USB and Configure Keyboard Country Code STARTSR60 Scanner Programmer’s Reference Manual Chapter 2 - Configuring Interface SettingsDigits SR60 Scanner Programmer’s Reference Manual Chapter 2 - Configuring Interface SettingsSR60 Scanner Programmer’s Reference Manual Chapter 2 - Configuring Interface Settings3 Configuring Label Transmit Settings How to Use the Prefix, Suffix, and Label ID When to Configure Label Transmit SettingsTo set global prefixes Setting Global PrefixesTo set global suffixes Setting Global SuffixesSet Suffix Setting Global Suffixes SETTo set a prefix or suffix that has only one character Setting a Single-Character Prefix or SuffixDisabling a Global Prefix or Suffix To disable global prefix or suffix charactersDisabling Global Prefix/Suffix Characters SET Chapter 3 - Configuring Label Transmit SettingsSet Prefix Set Suffix SR60 Scanner Programmer’s Reference ManualIndustry Standard Label Identifiers Prefixes Setting a Label IDAbout Symbology-Specific Label Identifiers To set the label ID location Setting the Label ID LocationIndustry Standard Label Identifiers Prefixes continued To set a symbology-specific label ID Setting a Symbology-Specific Label IDSetting Label ID Characters by Symbology SET Selecting the SymbologySR60 Scanner Programmer’s Reference Manual Chapter 3 - Configuring Label Transmit SettingsUCC/EAN Interleaved 2 of Codabar UPC-A UPC-A 2 digit add-ons UPC-A with 5 digit add-ons UPC-A with C128 add-onsUPC-E UPC-E with 2 digit add-ons UPC-E with 5 digit add-ons UPC-E Chapter 3 - Configuring Label Transmit Settingswith C128 add-ons EAN-13 EAN-13 with 2 digit add-ons EAN-13 with 5 digit add-onsSR60 Scanner Programmer’s Reference Manual Chapter 3 - Configuring Label Transmit SettingsEAN-13 with C128 add-ons EAN-8 EAN-8 with 2 digit add-ons EAN-8 with 5 digit add-ons EAN-8 C128 add-ons Code Standard 2 ofTo set a single-character label ID Setting a Single-Character Label ID6 Scan the END bar code Disabling a Symbology-Specific Label IDSR60 Scanner Programmer’s Reference Manual Chapter 3 - Configuring Label Transmit Settings4 Enabling and Configuring Symbologies Chapter 4 - Enabling and Configuring Symbologies All Symbologies Supported by All InterfacesEnabling Symbologies The Enable Codabar bar code on page 69 selects Codabar as an active symbology. Allows selection of check digit, start/ stop character and format, or label format fixed or variable length options Enable Code Symbology SelectionsDisable All Symbologies Enable PharmaCode Enable Code Enable UCC/EAN Enable Interleaved 2 of Chapter 4 - Enabling and Configuring SymbologiesEnable Codabar Enable UPC-A Enable UPC-E SR60 Scanner Programmer’s Reference ManualEnable EAN-13 Enable EAN-8 Enable Code Enable Standard 2 of Chapter 4 - Enabling and Configuring SymbologiesEnable IATA Enable MSI/Plessey SR60 Scanner Programmer’s Reference ManualAbout Code 39 Options Code 39/PharmaCode 39 OptionsCheck Digit Start/Stop CharactersChapter 4 - Enabling and Configuring Symbologies Configuring the Code 39 OptionsSET Check Digit Start/ StopChapter 4 - Enabling and Configuring Symbologies To set Code 39 Minimum Label LengthMinimum Label Length Code 39 Full ASCIIMinimum Label Length SET Chapter 4 - Enabling and Configuring SymbologiesEND Digits Set Minimum Label LengthSR60 Scanner Programmer’s Reference Manual Chapter 4 - Enabling and Configuring SymbologiesRead Verification Chapter 4 - Enabling and Configuring SymbologiesSet to One Read Set to Two Reads Set to Three Reads Set to Four Reads SR60 Scanner Programmer’s Reference ManualAbout PharmaCode 39 Options Configuring the PharmaCode 39 OptionsTransmit Check Digit Start/Stop CharactersAbout Code 128 and UCC/EAN 128 Options Setting Minimum Label LengthCode 128 and UCC/EAN 128 Options To set the Code 128 and UCC/EAN 128 Minimum Label Length Configuring the Code 128/and UCC/EAN 128 OptionsRead Verification Minimum Label LengthEND Digits Chapter 4 - Enabling and Configuring SymbologiesSet Minimum Label Length SR60 Scanner Programmer’s Reference ManualSR60 Scanner Programmer’s Reference Manual Chapter 4 - Enabling and Configuring SymbologiesRead Verification About Interleaved 2 of 5 Options Interleaved 2 of 5 OptionsCheck Digit Label Length FormatCheck Digit SET Configuring the Interleaved 2 of 5 OptionsRead Verification To set the Interleaved 2 of 5 Variable Length Format Variable Length FormatLabel Length Format Calculate Don’t Transmit TransmitTo set Interleaved 2 of 5 Fixed Length Format Fixed Length FormatFixed Length Format SET Enable Fixed Length FormatEND Digits Chapter 4 - Enabling and Configuring SymbologiesSet First Fixed Length Set Second Fixed Length No Second Fixed Length SR60 Scanner Programmer’s Reference ManualSR60 Scanner Programmer’s Reference Manual Chapter 4 - Enabling and Configuring SymbologiesRead Verification About Codabar Options Codabar OptionsGap Check Check DigitStart/Stop Characters Start/Stop MatchThe Set Second Fixed Length bar code on page 96 instructs the scanner that the next two programming labels scanned will define the second fixed label length. This setting must be between 03 and 50 characters Read Verification Configuring the Codabar OptionsStart/Stop Format Variable Length Format To set the Codabar symbology to Variable Length FormatLabel Length Format Fixed Length Format To set Codabar symbology to Fixed Length FormatSet Second Fixed Length Enable Fixed Length Format Set First Fixed LengthEND Digits Chapter 4 - Enabling and Configuring SymbologiesSR60 Scanner Programmer’s Reference Manual No Second Fixed LengthStart/Stop Characters SET Chapter 4 - Enabling and Configuring SymbologiesMatch Not Required SR60 Scanner Programmer’s Reference ManualSR60 Scanner Programmer’s Reference Manual Chapter 4 - Enabling and Configuring SymbologiesMatch Required Don’t Transmit Transmit Requires a format. For help, see the next Note Format = ABCD/TN*E Format = abcd/tn*eRead Verification UPC/EAN Options Data Format SettingsAbout UPC/EAN Options UPC/EAN ExpansionPrice/Weight Check Digit Configuring the UPC/EAN OptionsUPC Data Format Settings Read VerificationSET UPC-A Chapter 4 - Enabling and Configuring SymbologiesUPC-E SR60 Scanner Programmer’s Reference ManualChapter 4 - Enabling and Configuring Symbologies EAN Data Format SettingsSET EAN-13 Send NSD Don’t Send NSDUPC/EAN Expansion Chapter 4 - Enabling and Configuring SymbologiesEAN-8 SR60 Scanner Programmer’s Reference ManualEAN-8 to EAN-13 Expansion SET UPC-A to EAN-13 ExpansionUPC-E to UPC-A Expansion UPC/EAN Add-ons Each add-on type can be disabled, required or optionalThe following add-on filters for UPC/EAN are supported Price/Weight Check Digit Custom Add-onsDisable Add-ons Disable Price/Weight Check Digit Enable 4-Digit Check DigitRead Verification To set the number of minimum readsEnable 5-Digit Enable Euro 4-Digit Enable Euro 5-Digit Read Verification SET Chapter 4 - Enabling and Configuring SymbologiesNumber of Reads to Verify SR60 Scanner Programmer’s Reference ManualAbout Code 93 Options Code 93 OptionsMinimum Label Length Read VerificationMinimum Label Length Configuring the Code 93 OptionsTo set the Minimum Label Length SR60 Scanner Programmer’s Reference Manual Chapter 4 - Enabling and Configuring SymbologiesEND Digits Chapter 4 - Enabling and Configuring Symbologies Code 93 symbologyRead Verification Scan the following bar codes to set the number of reads to verifyAbout Standard 2 of 5/IATA Options Standard 2 of 5/IATA OptionsChapter 4 - Enabling and Configuring Symbologies Set to One Read Set to Two Reads Set to Three Reads Set to Four ReadsLabel Length Format Check DigitScan the following bar codes to configure the Standard 2 of Configuring the Standard 2 of 5/IATA OptionsIATA symbology options Read VerificationVariable Length Format To set Standard 2 of 5/IATA symbology to read Variable Length FormatLabel Length Format Fixed Length Format To change the defaults for the Standard 2 of 5/IATA symbologyEnable Fixed Length Format Set First Fixed Length Chapter 4 - Enabling and Configuring SymbologiesFixed Length Format SET SR60 Scanner Programmer’s Reference ManualSR60 Scanner Programmer’s Reference Manual Chapter 4 - Enabling and Configuring SymbologiesDigits Read Verification Chapter 4 - Enabling and Configuring SymbologiesSR60 Scanner Programmer’s Reference Manual Set to One Read Set to Two ReadsIATA Options About MSI/Plessey Options MSI/Plessey OptionsCheck Digit Label Length FormatRead Verification Configuring the MSI /Plessey OptionsLabel Length Format Chapter 4 - Enabling and Configuring SymbologiesVariable Length Format SR60 Scanner Programmer’s Reference ManualFixed Length Format To set the MSI/Plessey to read Variable Length FormatFixed Length SET To set the MSI/Plessey symbology to fixed length formatEND Digits Chapter 4 - Enabling and Configuring SymbologiesSet First Fixed Length Set Second Fixed Length No Second Fixed Length SR60 Scanner Programmer’s Reference ManualSR60 Scanner Programmer’s Reference Manual Chapter 4 - Enabling and Configuring SymbologiesRead Verification 5 Configuring General Features Chapter 5 - Configuring General Features Configuring the Green LED Idle StateConfiguring the Beeper Settings SET Beep Signal To set the beeper optionsPower-up Beep Chapter 5 - Configuring General FeaturesBeep Volume Enable DisableWhen to Beep Chapter 5 - Configuring General FeaturesGood Read Beep Duration SR60 Scanner Programmer’s Reference ManualTo enable the Marker Beam Configuring the Marker BeamSR60 Scanner Programmer’s Reference Manual Chapter 5 - Configuring General Features0.2 Seconds 0.3 Seconds 0.4 Seconds 0.5 Seconds 0.6 Seconds 0.8 Seconds 1 Seconds 1.2 SecondsTo enable or disable the Low Power mode Configuring the Low Power ModeTo set the Low Power Shutdown Delay option Configuring the Low Power Shutdown DelayTo set the Half Angle options Configuring the Half-AngleEnable Disable Chapter 5 - Configuring General Features3 Scan the END bar code SR60 Scanner Programmer’s Reference ManualSR60 Scanner Programmer’s Reference Manual Chapter 5 - Configuring General FeaturesSR60 Scanner Programmer’s Reference Manual A Factory Default ConfigurationRS-232 Interface Defaults Factory Default ConfigurationWand Emulation Interface Defaults USB Interface Defaults Keyboard Wedge Interface DefaultsLabel Transmit Settings Defaults Symbology DefaultsAppendix A - Factory Default Configuration Symbology Defaults continuedSR60 Scanner Programmer’s Reference Manual Symbology Defaults continuedAppendix A - Factory Default Configuration Appendix A - Factory Default Configuration General Features DefaultsSample Bar Codes Keypad Bar Codes RS-232 Host Commands B Reference InformationASCII Character Set Contacting Intermec Product Support SR60 Scanner Programmer’s Reference ManualC O D E 3 9 . T E S T Sample Bar CodesAppendix B - Reference Information CodeUPC-A with 2-digit add-ons Appendix B - Reference InformationUPC-A with 5-digit add-ons UPC-E14476925 Keypad Bar CodesCode 93.test Appendix B - Reference InformationSR60 Scanner Programmer’s Reference Manual Appendix B - Reference InformationSR60 Scanner Programmer’s Reference Manual Appendix B - Reference InformationB C D E F Overview of RS-232 Commands RS-232 Host CommandsAppendix B - Reference Information SR60 Scanner Programmer’s Reference ManualASCII Character Set Contacting Intermec Product Support SR60 Scanner Programmer’s Reference Manual Appendix B - Reference InformationPage P/N 937-004-001 Rev A 937-004-001SR60 Scanner Programmer’s Reference Manual