Chapter 2 — Configuring Interface Settings
F---------
I---------
END
Connect to a Laptop or PC and Send Control/Function Characters
You need to know if the scanner will be connected to a laptop (with an integrated keyboard), connected to a PC (with an external keyboard), or operated with no external keyboard. You also need to know if you want to transmit control characters and function characters.
•The Laptop/No External Keyboard bar code on page 34 provides the acknowledge signal to the PC. You should enable this feature if the scanner is connected to a laptop or operated with no external keyboard.
•The Keyboard Attached bar code on page 34 should be enabled when the scanner is connected to a standard PC with an external keyboard.
•The Enable Control Characters bar code on page 34 transmits all ASCII characters except NUL (00h). Disabling this feature limits the transmission of ASCII characters to this list:
•ASCII characters between 20h - 127h
•Carriage Return (CR=0Dh)
•BackSpace (BS=08h)
SR60 Scanner Programmer’s Reference Manual | 33 |
