Chapter 3 — Configuring Label Transmit Settings

Position Label ID as

Prefix---------

Position Label ID as

Suffix---------

END ------------------------------------------

Setting a Symbology-Specific Label ID

You can configure a label ID for each symbology.

To set a symbology-specific label ID

1Using the ASCII chart on page 158, identify the ASCII character(s) and the corresponding hex code(s) for the ASCII characters you plan to use as the label ID.

For example, suppose you want to change the label ID for UPC-A to A1. The ASCII chart shows that A equals 41 hex and 1 equals 31 hex.

2Scan the SET bar code on page 58.

3Using the bar codes in “Selecting the Symbology” on page 58, scan the bar code representing the symbology whose Label ID you want to change.

For this example, you would scan the UPC-A symbology bar code.

4Using the list of bar codes that starts on page 154, scan the four digits corresponding to the hex values you chose in Step 1.

SR60 Scanner Programmer’s Reference Manual

57

Page 69
Image 69
Intermec SR60 manual Setting a Symbology-Specific Label ID, To set a symbology-specific label ID