Chapter 2 — Configuring Interface Settings

Use the bar codes in “Keypad Bar Codes” on page 154 to scan two digits representing the number of Pre-Noise Transitions padded with leading zeros. For example, 03 = three transitions, 08 = eight, and 15 = fifteen.

END ------------------------------------------

Post-Noise Transitions Settings

SET -------------------------------------------

Don’t Transmit

Post-Noise---------

Set Post-Noise

Transitions---------

Use the bar codes in “Keypad Bar Codes” on page 154 to scan two digits representing the number of Post-Noise Transitions padded with leading zeros. For example, 03 = three transitions, 08 = eight, and 15 = fifteen.

END ------------------------------------------

18

SR60 Scanner Programmer’s Reference Manual

Page 30
Image 30
Intermec SR60 manual END Post-Noise Transitions Settings SET