Chapter 5 — Configuring General Features

0 Seconds (No Delay) ---------

2 Seconds---------

5 Seconds---------

10 Seconds---------

END ------------------------------------------

Configuring the Half-Angle

When enabled, the Half-Angle feature causes the scanner to scan with a scan angle that is approximately half the standard setting. Disabling the feature returns the scanner to the standard scan width.

To set the Half Angle options

1Scan the SET bar code.

2Scan the Enable bar code to enable half angle, or scan the Disable bar code to disable half angle.

142

SR60 Scanner Programmer’s Reference Manual

Page 154
Image 154
Intermec SR60 manual Configuring the Half-Angle, To set the Half Angle options