Chapter 5 — Configuring General Features

Configuring the Marker Beam

The Marker Beam feature provides the user with a spotter beam for improved aiming at distant bar code labels and/or in extremely bright environments. A Marker Beam can also be useful when scanning through showcase glass or scanning bar code menus containing bar codes printed with little space between them.

To enable the Marker Beam

1Scan the SET bar code on page 138.

2Scan the Enable Marker Beam bar code.

3Scan one of the Marker Beam Duration bar codes to set the duration for the beam to be illuminated.

4Scan the END bar code.

SET -------------------------------------------

Marker Beam Enable/Disable

Marker Beam Enabled ---------

Marker Beam Disabled ---------

Marker Beam Duration

0 Seconds---------

138

SR60 Scanner Programmer’s Reference Manual

Page 150
Image 150
Intermec SR60 manual Configuring the Marker Beam, To enable the Marker Beam