Linksys DMRW1000 manual Setting Up Your Controller, Setup with LELA, Setup without LELA

Wireless Home Audio Setting Up Your Controller

Setting Up Your Controller

Setup with LELA

The Wireless Home Audio Installer will guide you through the setup of your Linksys by Cisco Wireless Home Audio devices. Below is an overview of the steps required to get up and running.

•• Install EasyLink Advisor

•• Install Cisco Media Center software for your computer

•• Configure your Wireless Home Audio Devices

•• Create your Cisco account and register for music services

1. To begin, insert the CD into your CD-ROM drive.

2.Click the Start Setup button and follow the on-screen prompts to configure your Wireless Home Audio devices.

Start Setup

Setup without LELA

The Controller is an optional accessory that will enhance your Wireless Home Audio experience. It can be installed into an existing Wireless Home Audio system without the use of LELA.

NOTE:The installation process is simplified with the use of the LELA CD-ROM and it is necessary to use LELA to setup your Internet services.

The following instructions will guide you through the necessary steps to get up and running with your existing Wireless Home Audio setup.

Installing the Battery

The Controller comes with a battery that needs to be installed and charged. You can use the Controller as the battery is being charged.

To install the battery, perform the following steps:

3.Open the battery compartment.

4.Align the battery so that the notches line up with the grooves on the Controller. The plus and minus symbol should align to the connectors on the Controller.

5.Slide the battery towards the battery connectors until the battery is connected.

Notches Plus and Minus

NOTE: The battery connectors on the Controller should line up with the + and - symbols on the battery.

Controller/Wireless-N Touchscreen Remote 6