Linksys DMRW1000 manual Source Wireless Settings

Wireless Home Audio		Navigating the User Interface
Source	Wireless Settings

You can connect any external analog audio source to your Wireless Home Audio network using the RCA input jacks on the back of your Director or Player and play the music to all the devices in your home.

This allows you to stream music from sources such as turntables, stereo systems, DVD players, video cameras, karaoke systems, and generic MP3 players.

To play external analog audio, ensure that the RCA outputs are connected from your external device to the RCA inputs of the Director and perform the following steps:

1.Select Settings from the main menu.

2.Select Source from the Settings menu.

3.Select Analog Line In on the Source screen.

The audio from your RCA inputs will be played on the device. If you want it to play throughout your home, be sure you have your zones linked. The Now Playing Queue will indicate that the Analog Line In is being played.

The Wireless Settings option allows you to modify your wireless network settings.

Select Network  Use this option to select a wireless network name (also known as an SSID) from the list of available networks or enter a wireless network name manually by selecting Enter Network Name. To enter the name manually, use the touchscreen keyboard on the Controller and press Enter when done.

NOTE: The wireless network name is case‑sensitive. Capital letters can be found immediately after the group of lowercase letters.

Once the wireless network name has been selected, a screen will appear asking for the wireless security mode utilized on the network.

•• Open  If your network doesn’t have wireless security enabled, the open option should be selected.

NOTE: Linksys recommends using some form of wireless security on your network to help safeguard your personal information. Wireless security is typically configured on your router. Refer to the documentation included with your router for details on enabling wireless security.

•• Shared  If your network uses WEP security, select this option and enter in WEP key number 1. Enter the appropriate number of hexadecimal characters (“0” to “9” and “A” to “F”). For 64-bit encryption, enter exactly 10 hexadecimal characters. For 128‑bit encryption, enter exactly 26 hexadecimal characters.

•• WPA  Select TKIP or AES and enter the network’s Passphrase (also called a pre-shared key) of 8-63 characters.

•• WP2  Select TKIP or AES and enter the network’s Passphrase (also called a pre-shared key) of 8-63 characters.

Controller/Wireless-N Touchscreen Remote 28