Wireless Home Audio | Navigating the User Interface |
•• 
button on the Wireless Home Audio Director and the 
button on your router..
••
Advanced This option is used for IP configuration. A dynamic or static IP address can be selected here.
•• Dynamic IP The dynamic IP option should be selected if your router or network connection automatically provides an IP address to devices on the network. Once this option is selected, the Details screen can be used to verify that an IP address has been obtained.
•• Static IP Selecting Static IP will prompt you to enter the IP address. To enter the IP address using the remote control, remove the existing address by using the left arrow on the Navigation Halo. Numbers can be entered manually using the keypad or arrow up and down on the Navigation Halo to scroll through the number selections. To move to the next digit, use the right arrow on the Navigation Halo. To enter a dot (.) or period in the IP address, press the zero (0) button twice.
Details This option displays the current network connection settings including the wireless network name, wireless security type, DHCP status, IP address, subnet mask, gateway, and DNS information.
Zones and Libraries
Rename Zone This option is used to rename a device with a name that will allow you to know where it is located in your home. This makes it much easier to select which areas to play music to or link.
Rediscover If one of the Wireless Home Audio devices or one of your libraries on the network is not appearing, use this option to rescan for any devices or libraries that are not showing up.
General Settings
The General option allows you to configure general devices settings for your Director.
Date/Time
Auto update When this option is enabled, the date and time settings are automatically updated via the Internet.
Set Time A series of screens will appear allowing you to enter the month, day, year, and time manually.
Set Time Zone Select your local time zone.
Daylight saving This option should be selected when observing daylight saving time.
Time Format This allows you to select a 12 hour or 24 hour time format. The 12 hour format is the default setting.
Date Format Allows you to specify the order that the day, month, and year are displayed.
29 |
