102
CONFIGURING WITH A LOCAL CONSOLE
Task 2: Configuring the Operating System
From the Setup Menu,
Press 1to configure the router’s operating system.
The prompt
Unit Designation :
will appear at the bottom of the video display.
The default of Unit Designation is a unique name based on
the router’s unique Ethernet network address. This will be
a series of numbers, or letters, appearing after the colon
above.
Choices:
•Type a new name for your router of up to ten letters
and/or numbers.
This name will appear in the Command Prompt and as the
router name in OverLAN Commander..
•Leave the current setting unchanged by not typing
anything.
Press the Enter key when you are ready to continue.