CONFIGURING WITH A LOCAL CONSOLE
All the above choices for filtering concern only Ethernet II frames. If your Ethernet network uses an Ethernet 802.3 or other types of frames, then the above filtering features will have no effect regardless of whether they are Disabled or Enabled.
After pressing the Enter key for Other Filtering, the following message will appear:
Is the above setup information correct? (y/n) -
Type n to start over with this section.
Type y to use the current settings. While the settings will be used by the router, they are not actually saved. To save the settings, you must select SAVE from the command prompt of the OverLAN Operating System.
You may now go to Task 8.
