CONFIGURING YOUR ROUTER

Enable RIP allows the selected router to use dynamic routing if RIP is available on the Ethernet network.

Enable Poison RIP is only available if you turned on Enable RIP. Enable Poison RIP is used if you want the router to advertise that the remote network (selected earlier in Task 3) is not available when the ISDN WAN connection is not active.

Step 3: Setup a Static Routing Table.

You may want to create a Static Routing Table if IP Routing is enabled. Static routing can be used in conjunction with RIP.

Choose

The Static Routing Table is shown below:

Static Routing Table dialog box

91

Page 91
Image 91
Ringdale ISDN user manual Setup a Static Routing Table, Static Routing Table dialog box