Ringdale ISDN user manual Translate Mode

CONFIGURING WITH A LOCAL CONSOLE

If WAN IP Assignment is set to Fixed then you must enter the WAN IP Address at the prompt WAN IP Address.

Then the prompt

Translate Mode :

will appear.

1 to 1 Static allows one computer on the local network to have permanent access to the router (for the Internet, for example).

1 to 1 Dynamic allows one computer at a time on the local network has access to the router (for the Internet, for example).

1 to Many allows many users on the local network simultaneous access to the router (for the Internet, for example) using a single dynamic IP address.

NOTE: If 1 to 1 Dynamic is selected, the router must be locked by the user before Internet access is permitted and released after closing the connection. Select lock or release from the toolbar, the Router menu, or from a pop-up menu accessed by right-clicking on the router name in the list of routers.

If 1 to 1 Static IP Address Translation is selected, then you must type the IP address of the computer or device getting access to the router. Reset of the router is required when enabling this option.

Press the Enter key when you are ready to continue.

133