Xantech MRC88M, MRAUDIO8X8M Planning The System, Basic Mode, Advanced Mode, Expanded Mode

Page: 36 Model MRC88m / MRAUDIO8x8m

PLANNING THE SYSTEM

Before attempting any programming, plan the system configuration first. This should include the following:

1. Determine the brand and type of all source components to be used.

Source 1: ________________________			Source 5: ________________________
IR File Name: _____________	IR Library	Palette	IR File Name: _____________	IR Library	Palette
Source 2: ________________________			Source 6: ________________________
IR File Name: _____________	IR Library	Palette	IR File Name: _____________	IR Library	Palette
Source 3: ________________________			Source 7: ________________________
IR File Name: _____________	IR Library	Palette	IR File Name: _____________	IR Library	Palette
Source 4: ________________________			Source 8: ________________________
IR File Name: _____________	IR Library	Palette	IR File Name: _____________	IR Library	Palette
Zone Audio Source 1: ______________			Zone Audio Source 5: ______________
IR File Name: _____________	IR Library	Palette	IR File Name: _____________	IR Library	Palette
Zone Audio Source 2: ______________			Zone Audio Source 6: ______________
IR File Name: _____________	IR Library	Palette	IR File Name: _____________	IR Library	Palette
Zone Audio Source 3: ______________			Zone Audio Source 7: ______________
IR File Name: _____________	IR Library	Palette	IR File Name: _____________	IR Library	Palette
Zone Audio Source 4: ______________			Zone Audio Source 8: ______________
IR File Name: _____________	IR Library	Palette	IR File Name: _____________	IR Library	Palette

CAUTION: See caution card (included) for the latest information regarding code compatibility before finalizing the system as there may be some IR code incompatibilities.

2.Determine the components to be used in each zone. Some sources may not be available in all zones.

3.Perform the Out-of Box PRE TEST as outlined in Section 2.

4.Assemble the components into a working MRC88m system such as that shown in Figure 13.

5.Decide whether the MRC88m System will be programmed in BASIC, ADVANCED or EXPANDED modes

BASIC MODE

ADVANCED MODE

EXPANDED MODE

6.Program the MRC88m System using the included version of Dragon Drop-IR™ Software (DRAGMRC).

7.Transfer the System Project to the MRC88m Controller(s).

8.Confirm all functions in all zones.

INSTALLING AND CONFIGURING THE DragMRC SOFTWARE

(BASIC/ADVANCED/EXPANDED)

COMPUTER REQUIREMENTS (MINIMUM)

•Pentium w/32Mb RAM min.

•Windows 98/ME/NT/2000/XP

•20 MB Hard Drive space (you will need more as your keypad libraries expand)

•16 MB RAM (32 MB preferred)

•Mouse

© 2009 Xantech Corporation