Xantech MRC88M, MRAUDIO8X8M installation instructions Saving and BACKING-UP Files

Page: 78 Model MRC88m / MRAUDIO8x8m

SAVING AND BACKING-UP FILES

AUTOMATIC SAVE

When working on a project in DragMRC, it is automatically saved on a continuous basis, It is OK to quit a project at any time and come back to it for further work by simply clicking on Open Project (Ctrl+O) from the File menu and double clicking the filename in the list.

SAVE PROJECT AS

To create a variation of a project without having to reprogram everything from scratch, i.e. Change “Jones” project to “Smith” project:

1.Click “SAVE PROJECT AS” (CTRL+S) from the File menu

2.Click in the FILE NAME text box and type in the new project file name to SAVE AS.

3.If there are no changes to the system (type of sources, brand of sources, zone configuration etc.) transfer the project. If there are any changes to be made, modify the new project and then transfer to the MRC88m Controller.

BACKING-UP PROJECT FILES

It is always wise to backup all project files to another hard drive, floppy disc or other storage media. It is recommended that each project be saved to a floppy disc and kept with each client's job files. To make backup copies, proceed as follows:

1.Open the hard drive icon from "My Computer" (usually drive C:) in Win 98/NT/ME/2000/XP. Double- click on the Program Files directory and open the DragMRC folder, then the Projects folder.

2.Locate the project files. The files in the Projects folder will have a .pjd extension.

3.Open a window for the backup drive and make a Projects folder for that drive.

4.Click and drag the files to be backed-up that are in the Projects folder on the main hard drive and drop them into the Projects folder in the backup directory. To COPY the files to a floppy disk, right-click on the selected files and choose 3.5 Floppy (Drive letter) under the SEND TO menu.

NOTE 1: Project files can be relatively large, requiring up to 1 MB of space or more, depending on the complexity of your project. When backing up to 1.44 MB floppies, you may need one floppy for each Project.

NOTE 2: These file sizes can be reduced dramatically, if needed, by using a good file compression program, like WinZip.

USING BACKUP FILES

To use back-up files at a later date, copy them back to the Projects folder in the DragMRC directory (after un- Zipping them, if previously Zipped). Proceed as follows:

1.Locate the Projects folder on the main and backup directory or drives.

2.On the backup directory or drive, open the Projects folder and identify the files needed, with the proper extensions, (.pjd). Un-Zip them, if previously Zipped.

3.Click and drag these files from the backup directory/drive and drop them into the Projects folder in the DragMRC directory.

BACKING-UP SMARTPAD AND PALETTE FILES

The SmartPad, Palette, RS232pals folders in the DragMRC directory contain all the files of learned individual IR commands and specific palettes that have been created for all projects. These should be backed up in the event of a hard drive failure, for transferring work to another computer, etc. Back up these files to another hard drive, a CDR or a floppy. Proceed as follows:

1.Open the hard drive icon from "My Computer" (usually drive C:) in Win 98/NT/ME/2000/XP. Open the DragMRC folder.

2.Locate the SmartPad, Pallets, and RS232pals folders.

3.Click and drag (copy) these folders to the backup drive. These files are small enough to easily fit on one 1.44 MB floppy.

© 2009 Xantech Corporation