Ringdale ISDN Task 3: Set up the ISDN/PPP Parameters:

80
Task 3: Set up the ISDN/PPP Parameters:
The ISDN Parameters are shown below:
From the Setup dialog box
Step 1: Select the Telephone Co.
This is the type of ISDN phone service for the location of the
selected router. For routers in the USA, select National
ISDN 1. For routers in Germany, select ETSI Variant. For
routers in other European countries, select ETSI. For any
other country (or if you are unsure of the type of ISDN phone
service or of the location of the selected router), use the
default setting for this option. The default setting is ETSI.
If this option is set incorrectly, the selected router may not be
able to communicate with the phone switch and thus, may
not be able to make or receive calls.
Step 2: Enter Router Phone #1.
Type the ISDN phone number of the selected router. Some
ISDN lines have two phone numbers. If this is the case, type
the number corresponding to channel B1 here.
NOTE: ISDN Phone numbers and ISDN SPID numbers are
available from the phone company. For more information about
them, you will need to contact your ISDN provider.
CONFIGURING YOUR ROUTER