Cisco Systems 1503 manual System Information Commands, Show system information

System Information Commands

System Information Commands

Use the commands in this section to display general information about the hub and the stack of hubs.

show system information

Syntax: show system information

Mode: Guest

Description: Displays system information as shown below:

Hub> show system information

System description: Cisco Stackable Ethernet Hub

System up time: hour, 56 minutes

System name: Stack 1

System contact: Mike

System location: Software Group

Command Display Definitions

•System description—Hub model.

•System up time—Length of time that the management agent inside the hub has been running.

•System name—Name of the hub, configured with the system name command.

•System contact—Name of the person responsible for the hub, configured with the system contact command.

•System location—Where the hub is located, configured with the system location command.

Using Your Hub Software 3-25