show management information
Syntax: | show management information |
Mode: Guest
Description: Displays information about the network management hub as follows:
Hub> show management information
Hub id: 1
H/W version : 1.
F/W version: 1.01
Bootup option : normal
Physical address: 00-00-12-34-56-78
Command Display Definitions
•Hub id—Number used to identify the hub in a stack. An integer between 1 and 5. Read the section “Hub ID Numbers” earlier in this chapter for information about how to determine hub ID numbers.
•H/W version—Hardware version of the hub.
•F/W version—Firmware version of the hub.
•Bootup option—Bootup option configured with the bootup-optioncommand as described in the section “Bootup Option Commands” earlier in this chapter.
•Physical address—Hardware address (also called the MAC address or the Ethernet address) of the hub. This address is assigned by the device’s manufacturer and usually appears somewhere on the device itself.
3-28Cisco Micro Hub User Guide
