Statistics Commands
clear counters
Syntax: | clear counters {stack hub [hub id] port [hub id] [port id] } |
Mode: Administrator
Description: Clears all accrued statistics for the specified stack, hub, or port, or a combination of these.
Command Keyword Definitions
•stack—Clears statistics for all ports on all hubs in the stack.
•hub—Clears statistic for the specified hub. If no hub is specified, statistics are cleared for all hubs in the stack.
•port—Clears statistics for the specified port on the specified hub. If no port is specified, statistic are cleared for all ports in the stack.
•hub id—(Optional) Number used to identify the hub in a stack. An integer between 1 and 5. Read the section “Hub ID Numbers” earlier in this chapter for information about how to determine hub ID numbers.
•port id—(Optional) Port number that is shown on the rear panel of the hub. A value from 1 to 8.
Using Your Hub Software 3-43
