TANDBERG 6000 MXP user manual Using sub-address / extension address / MCU password, Example

General Use

ƒ2x64 calls

ƒ2x56 calls

-as making 2 x 64 kbps or 2 x 56 kbps calls to the same system.

Place this type of call by:

ƒSet Network to ISDN

ƒSet Bandwidth to 128 kbps

ƒA field for the 2nd number pops up in Call Settings.

ƒEnter the second number in the Call Settings field. For 128 kbps calls that use bonding, ignore the second number field and just enter one number to be dialed.

Using sub-address / extension address / MCU password

Sub-address is used to address different systems on the same ISDN line and is primarily used in European Countries. LAN equivalent extension address or TCS-4 is used to address different systems on a LAN, when dialing via a gateway.

To specify an ISDN sub-address or its LAN equivalent extension address (TCS-4), add a star (*) after the number and then enter the sub-address/extension address.

Example:

12345678*10 ( <number>*<Sub-address/extension address/MCU password>)

When dialing IP via a gateway, the number behind the star (*) on IP might be interpreted as an extension address.

When calling to external MCU’s requiring a password (TSC-1), this password can be added after the star (*). If no password is specified, the user will be asked to enter the password (after connecting to the MCU).

171