TANDBERG 6000 MXP user manual Ieee

TANDBERG 6000 MXP

5.8.2.7 IEEE 802.1x

802.1X

The system may be connected to an IEEE 802.1x LAN network. Supported 802.1x protocols are EAP-MD5, EAP-PEAP and EAP-TTLS. The 802.1x authentication are enabled by setting 802.1x Mode to On.

On	802.1x authentication enabled
Off	802.1x authentication disabled

Anonymous Identity

The 802.1x Anonymous ID string is to be used as unencrypted identity with EAP types that support different tunneled identity, EAP-PEAP and EAP-TTLS. The anonymous ID, if set, will be used for the initial (unencrypted) EAP Identity Request.

Identity

The 802.1x Username is the username needed for 802.1x authentication.

Password

The 802.1x Password is the password needed for 802.1x authentication.

EAP-MD5

On The EAP-MD5 protocol is enabled

Off The EAP-MD5 protocol is disabled

EAP_TTLS

On The EAP_TTLS protocol is enabled

Off The EAP_TTLS protocol is disabled

EAP-PEAP

On The EAP_PEAP protocol is enabled

Off The EAP_PEAP protocol is disabled

Note that 802.1x wireless LAN is not supported.

226