TANDBERG 6000 MXP

3.11.6Take New Snapshot

The system can take a snapshot of your live video. Snapshot is handy when you are in a call with a system that does not support Dual Stream. Use Snapshot to show a snapshot of your presentation and continue the meeting with main camera.

How to use snapshot:

You find Take New Snapshot in the Presentation menu.

1.Select the Snapshot header.

2.Select Take New Snapshot and press OK to take a snapshot.

Snapshot is found on the Star key on the remote control.

1.Press Star and you take a snapshot of the current video source (current video is default snapshot source). You can change the snapshot source in Control Panel - Presentation Settings. Note that snapshot does not work when you are in an input field in the menu (the star key is then used to write the star sign).

Note that Take New Snapshot is not possible when Dual Video Stream is activated and that it is only available when you are in a call.

Note that the Snapshot feature uses H.261 Annex D and hence will not work when using H.264 video compression

82

Page 96
Image 96
TANDBERG 6000 MXP user manual Take New Snapshot, How to use snapshot