TANDBERG 6000 MXP user manual Video Quality, Intelligent Video Management IVM, Motion, Sharpness

TANDBERG 6000 MXP

5.4.6Video Quality

The different video sources need different Video Quality Settings. Main Camera, VCR, AUX and Split Screen have Motion as default. PC, Document Camera and VNC have Sharpness as default.

Motion*	Optimized for smooth motion video (CIF/SIF or w288p for low bandwidths,
	448p/400p, Interlaced CIF (iCIF) / Interlaced SIF (iSIF) or w448p for high
	bandwidths).
	When a Precision HD Camera is connected it will prefer: w288p for low
	bandwidths and w448p from 512kbps.
Sharpness*	Optimized for sharp video (4CIF/4SIF, SVGA, XGA, w720p).
	When a Precision HD Camera is connected it will prefer: w720p.
Auto	The system chooses the best of Motion or Sharpness depending on picture
	layout and bandwidth.

5.4.6.1 Intelligent Video Management (IVM)

It is possible to configure the picture sent from the system depending upon specific requirements and applications adding an additional level of flexibility and adaptability.

Generally, the IVM will always try to transmit the format closest to the video input format. Each video input can be configured to either motion or sharpness:

Motion*:

When there is a need for higher frame rates, typically when a large number of participants are present or when there is a lot of motion in the picture.

At low bit rate:

ƒCIF will be used from a PAL video input

ƒSIF from NTSC

ƒw288p from wide format (HD720p) input

ƒVGA/SVGA/XGA from PC, Digital Clarity

At high bit rate:

ƒ448p will be used from a PAL video input if Natural Video is ‘Off’ or ‘Auto’ or if Natural Video is ‘x kbps’ and the bit rate is lower than x kbps

ƒ400p from NTSC if Natural Video is ‘Off’ or ‘Auto’ or if Natural Video is ‘x kbps’ and the bit rate is lower than x kbps

ƒiCIF will be used from a PAL video input, if Natural Video is ‘x kbps’ and the bit rate is higher than or equal to x kbps

166