TANDBERG 6000 MXP user manual ISDN/External/Leased E1/T1, Type

General Use

5.8.1ISDN/External/Leased E1/T1

Network	Before using the system it is necessary to specify which network to use and
Type	define its settings.
ISDN-	If you want to use your system via ISDN-BRI, you should select Network Type:
BRI	ISDN-BRI and enter the ISDN BRI Settings menu to set the BRI parameters.
ISDN-	If you want to use your system via ISDN-PRI, you should select Network Type:
PRI*	ISDN-PRI and enter the ISDN PRI Settings menu to set the PRI parameters.
Leased	If you want to use your system via Leased E1/T1, you should select Network
E1/T1*	Type: Leased E1/T1 and enter the Leased E1/T1 Settings (see Leased E1/T1
	Settings) menu to set the Leased E1/T1 parameters.
External	If you want to use special networks and connect using RS449, V.35, X.21 or
	connect to ISDN via an external IMUX, you should select Network Type: External
	and enter the External Network Settings (see External Network Settings menu to
	set the External Network parameters.

*Note that both Leased E1/T1 and ISDN-PRI uses the same interface on the codec marked E1/T1.

199