TANDBERG 6000 MXP user manual Operator Safety Summary

User Manual

Operator Safety Summary

Operator Safety Summary

For your protection please read these safety instructions completely before you connect the equipment to the power source. Carefully observe all warnings, precautions and instructions both on the apparatus and in these operating instructions.

NOTE! When mounting and installing the TANDBERG 6000 MXP Profile it is important to follow the guidelines in the enclosed Installation Sheet.

The TANDBERG 6000 MXP Profile Installation Sheet is also found on the User Manuals CD for TANDBERG Video Systems.

Keep this manual for future reference.

Water and Moisture

•Do not operate the apparatus under or near water - for example near a bathtub, kitchen sink, or laundry tub, in a wet basement, near a swimming pool or in other areas with high humidity.

•Never install jacks for communication cables in wet locations unless the jack is specifically designed for wet locations.

•Do not touch the product with wet hands.

Cleaning

•Unplug the apparatus from communication lines, mains power-outlet or any power source before cleaning or polishing. Do not use liquid cleaners or aerosol cleaners. Use a lint-free cloth lightly moistened with water for cleaning the exterior of the apparatus.

•Unplug the apparatus from communication lines before cleaning or polishing. Do not use liquid cleaners or aerosol cleaners. Use a lint-free cloth lightly moistened with water for cleaning the exterior of the apparatus.

Ventilation

•Do not block any of the ventilation openings of the apparatus. Never cover the slots and openings with a cloth or other material. Never install the apparatus near heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

•Do not place the product in direct sunlight or close to a surface directly heated by the sun.

Lightning

•Never use this apparatus, or connect/disconnect communication cables or power cables during lightning storms.

Dust

•Do not operate the apparatus in areas with high concentration of dust

Vibration

•Do not operate the apparatus in areas with vibration or place it on an unstable surface.

Power connection and Hazardous voltage

vii