TANDBERG 6000 MXP user manual Picture Control

General Use

3.10.5Picture Control

Focus, Brightness and White balance are set for auto focus, auto brightness and auto white balance by default. If you need to set focus, brightness and white balance manually, go to Picture Control in the Camera Control menu.

Focus

Auto			Auto focus continuously updates the focus throughout the call. When moving
			the camera, the system will use auto focus for 5 seconds to set the right focus
			of the new camera position. After 5 seconds auto focus is turned off to prevent
			continuous focus adjustments of the camera.
Manual at			When Manual is selected the + and - buttons are enabled. Select the + or -
Precision			button and press OK button to adjust the focus. The manual focus has 10
HD Camera			steps. If focus is set manually, the system will stay in manual focus and not
			change to auto focus automatically even if you zoom or move the camera.
			When the user zoom or move the camera and manual focus is on, the indicator
			line should say “Manual Focus”.
Manual at			When Manual is selected, the slide bar is enabled. Use the arrow keys to adjust
WAVE II			the focus. The temporary focus will last until you move the camera again and
Camera			auto focus will take effect.
Camera Brightness
Auto	Auto brightness continuously updates the brightness of the camera picture.
Manual	When Manual is selected, the slide bar is enabled. Use the arrow keys to manually
	adjust the camera brightness. If brightness is set manually, the system will keep
	this brightness level also when the camera is moved. When the user zoom or
	move the camera and manual brightness is on, the indicator line should say
	“Manual Brightness”.
White Balance
Auto		Auto white balance continuously updates the white balance.
Manual		When Manual is selected, the slide bar is enabled. Use the arrow keys to
		manually adjust the white balance. The manual white balance has 10 steps. If
		white balance is set manually, the system will keep this white balance also when
		the camera is moved. When the user zoom or move the camera and manual
		white balance is on, the indicator line should say “Manual White Balance”.

Backlight Compensation*

On

The Backlight Compensation can be set to On.

73