Alloy Computer Products GSS-24T2SFP Command Line Interface CLI, Hyper Terminal Setup Options

2.14 Command Line Interface (CLI)

In addition to the web management interface, the GSS-24T2SFP web smart switch also provides a serial interface (RS-232) as a console port on the rear panel to manage the switch. A Windows Hyper Terminal session is recommended for use. This section will explain how to setup and use Hyper Terminal to manage this switch.

2.14.1 Hyper Terminal Setup Options

„Baud Rate: 19200 bps

„Data Bits: 8

„Parity: None

„Stop bits: 1

„Flow control: None

2.14.2 Switch Management Commands In Console

„Login System

After the system has started, the following prompt will displayed on the Hyper Terminal session. The administrator needs a valid username and password to login this system. The username and password in CLI are the same as the ones using for login access through the web page.

After entering the username, the following prompt will be displayed. The Administrator should enter the correct password.

53