InstallationProblems(continued)

Symptom

Possible Causes

Possible Solutions

 

 

 

 

After plugging the

Radio module or carrier(s) is

Plug the radio module or

radio module or

plugged into an electrical

carrier(s) into an outlet not

carrier into an

outlet controlled by a switch.

controlled by a switch.

electrical outlet, one

 

 

 

 

Power cord of radio module

Unplug the radio module’s

or more radio module

is not inserted properly.

power cord/AC adapter from

POWER and PASS

 

the electrical outlet and from

LEDs do not light.

 

 

the radio module. Carefully

 

 

 

 

 

 

reinsert the power cord/AC

 

 

 

adapter into the radio module

 

 

 

and into the electrical outlet.

 

 

 

Repeat for each radio module.

 

 

 

 

 

 

Power cord of carrier(s) is

Unplug the carrier’s power

 

 

not inserted properly.

cord from the electrical outlet.

 

 

 

Unplug the AC adapter from

 

 

 

the carrier and from the power

 

 

 

cord. Carefully reinsert the AC

 

 

 

adapter into the carrier and

 

 

 

into the power cord. Plug the

 

 

 

power cord back into the

 

 

 

electrical outlet. Repeat for

 

 

 

each carrier.

 

 

 

 

 

 

Power cord of radio module

Call for help.*

 

 

or carrier(s) is defective.

 

 

 

 

After plugging the

Radio modules are not

Power down the carrier and

radio module into an

synchronized properly.

repower it. If you have multiple

electrical outlet, the

 

carriers, repower the control

radio module’s

 

carrier first, and then power the

POWER LED lights,

 

expansion carriers in order from

but the PASS LED

 

left to right.

does not light.

 

If the problem persists, call for

 

 

 

 

 

 

help.*

 

 

 

 

 

 

The radio module is mal-

Replace the radio module.

 

 

functioning.

 

 

 

 

 

* See “Customer Support” on the inside front cover of this book.

5-2Troubleshooting

Page 77
Image 77
Lucent Technologies Transtalk 9000 manual 2Troubleshooting, Power and Pass