Lucent Technologies Transtalk 9000 manual Setting the Line-Ringing Options

Setting the Line-Ringing Options

Use the following guidelines to ensure optimal voice quality when using MDW 9030P Pocketphones with a PARTNER, PARTNER Plus, or PARTNER II system in key mode:

Telephone	System with Two Carriers	System with Three Carriers
Communications	(one control and one expansion	(one control and two expansion
System	carrier)	carriers)
PARTNER	1. Set Line Ringing for each	Not applicable: PARTNER
	extension that has a radio	supports up to 12 phones.
	module in the control carrier to
	Ring.
	2. Set Line Ringing for each
	extension that has a radio
	module in the expansion
	carrier to No Ring. (Install an
	external audible alert for these
	extensions.)
PARTNER Plus,	1. Set Line Ringing for each	1. Set Line Ringing for each
PARTNER II	extension that has a radio	extension that has a radio
	module in the control carrier to	module in the control carrier to
	Ring.	Ring.
	2. Set Line Ringing for each	2. Set Line Ringing for each
	extension that has a radio	extension that has a radio
	module in the expansion	module in expansion carrier #1
	carrier to Delayed Ring.	to Delayed Ring.
		3. Set Line Ringing for each
		extension that has a radio
		module in expansion carrier #2
		to No Ring. (Install an external
		audible alert for these
		extensions.)

NOTE:

For PARTNER II hybrid systems that use pooled lines, set the Line Ringing options as described in the above table if more than six MDW 9030P Pocketphone handsets have the same pooled line appearance.

6-4MDW 9030P Pocketphone Compatibility