5Insert one end of the telephone line cord into an extension jack or terminal/station connector
on your communications system switch/control unit (refer to your communications system manual for the proper location).
6Insert the radio module’s power cord into the side of the radio module. Insert the other end of
the telephone line cord into the bottom of the radio module.
N | X |
|
S | T |
|
I | E |
|
O | N |
|
N | S |
|
S | I | MUSIC |
| O | |
|
| ON |
| N | HOLD |
| S |
|
Radio
Module
POWER
RADIO
PASS
7Plug the power cord/AC adapter into a properly grounded
by an on/off switch.
!
CAUTION: Never connect or disconnect the telephone line cord while the radio module is plugged into the wall outlet.
Go to “Installation
