Handset
This section explains how to install the handset battery pack, change the communications system setting, and fill out the handset label.
Inserting and Removing the
Handset’s Battery Pack
1To insert the battery pack into the handset, insert the two small rectangular tabs located
along the bottom back edge of the handset into the two rectangular holes along the bottom front edge of the battery pack.
2Press the battery pack downward until it clicks into place.
The battery pack must be charged prior to using the handset. See “Battery Charger” later in this chapter for instructions.
Rectangular tabs |
Spring latch |
3To remove the battery pack, slide the spring latch upward (away from the battery pack).
While holding the latch up, grasp both sides of the battery pack, then gently pull the battery pack upward and out.
