The higher the number, the stronger the signal, as shown in the following table. You can press 1again to show a subsequent
Display Number | Signal Strength Is |
|
|
10 | Strong |
|
|
9 | Strong |
|
|
8 | Strong |
|
|
7 | Very good |
|
|
6 | Very good |
|
|
5 | Good |
|
|
4 | Good to Fair |
|
|
3 | Fair |
|
|
2 | Near end of range |
|
|
1 | Near end of range/loss of link |
|
|
7.To determine voice quality, press 2.
The display shows the voice quality (QUAL) for both the handset (HS) and the base (B) (the radio module) using a number from 1 to 10, as shown in the following display.
ON
The higher the number, the better the voice quality, as shown in the table below. A low number may indicate potential interfering devices (such as another radio transmitter) in the area. You can press 2again to show a subsequent
Display Number | Voice Quality Is |
|
|
10 | Very good |
|
|
9 | Very good/almost error free |
|
|
8 | Errors, but not noticeable in |
| normal speech |
|
|
7 | Errors, but not noticeable in |
| normal speech |
|
|
6 | Noticeable noise |
|
|
5 | Noticeable noise |
|
|
4 | Noisy but intelligible speech |
|
|
3 | Noisy but intelligible speech |
|
|
2 | Garbled speech |
|
|
1 | Unintelligible speech |
|
|
8. To exit Wireless Test Mode and Local Mode, press O.
