Using a Headset

Lucent Technologies offers the Supra 9030 headset, which is specifically designed for use with your MDW 9030P wireless phone. A headset assists in call answering, and provides hands-free operation.

For ordering information, see "Ordering Replacement & Optional Parts" in Chapter 4.

To use the Supra 9030 headset, hold its cord with the "UP" label facing you, and insert the plug directly into the headset connector on the bottom of the handset (near the mouth- piece).

CAUTION:

Plug ONLY the Supra 9030 headset cord into the headset connector.

NOTE:

Calls cannot be heard on the handset receiver when the headset is plugged in to the headset connector. The handset microphone is also deactivated. The range of the handset is slightly diminished when you are using a headset. You may need to move closer to the radio module, or move the radio module closer to you.

If desired, you can disconnect the headset from the handset without dropping the call. Just unplug the headset cord from the handset. You can then use the handset as you normally would.

Using the Headset On/Off Button

The headset On/Off button near the antenna becomes active only when the headset is plugged into the headset connector. The headset On/Off button is identical in function to the

Obutton near the dialpad.

Answering Calls with a Headset

When you receive a call, you will hear a ringing tone or feel a vibration coming from the handset (you will not hear a tone from the headset itself). To answer the call, press either the headset On/Off button near the antenna or the Obutton near the dialpad.

Using the MDW 9030P Pocketphone 3-17

Page 65
Image 65
Lucent Technologies Transtalk 9000 manual Using a Headset, Using the Headset On/Off Button, Answering Calls with a Headset