10Working from left to right, insert a radio module into each slot of the control carrier, starting with
Slot 1; hook each radio module onto a mounting rod. Slowly swing the radio module's card edge into the card edge connector on the back of the carrier.
IMPORTANT:
Slot 6 of a carrier that has another carrier to the right of it must always contain a radio module to pass the synchronization signal to the next carrier.
11
When the card edge is fully seated, a snap lock on the bottom of the radio module will engage.
12Repeat Steps 10 and 11 for each expansion carrier, until each radio module is inserted into
a carrier.
NOTE:
Fill all six slots of the current carrier before inserting radio modules into the next carrier.
13
Insert a telephone line cord into the bottom of each radio module.
