Enabling or Disabling the Alerter
The alerter is an audible signal to notify you of an incoming call. If a call comes in while the phone is idle, the handset rings. If you are already on a call, the handset chirps softly. You can adjust the volume of the alerter by pressing the "+" button or the
1.Make sure the handset is turned off.
2.Press and hold the Select button (") for three seconds.
3.While still holding ", press O.
The handset beeps twice, and the display shows the handset settings, indicating you are in Local Mode. (While in Local Mode, the MDW 9030P can still receive notification of incoming calls.)
If the alerter is disabled, the No Ring icon (a bell with a line through it) appears in the second line of the display. For example:
ON
If the alerter is enabled, the icon is not displayed. For example:
ON
4.Press "A" (2) on the dialpad to enable or disable the alerter.
5.Press Oto exit Local Mode.
Note:
Both the alerter and the vibrator can be disabled at the same time. In this case the only notification you have of an incoming call is that a line status indicator (a truncated triangle or a rectangle, depending on your communications system) flashes in the display.
