✃

Battery Charger Wall-Mounting Template

Use the template below to position the screws for mounting your MDW 9030P Pocketphone battery charger:

1.Cut out the template along the dotted line.

2.Lightly affix the template to the wall with tape where you want to attach the battery charger. If possible, choose a location that will position at least one of the screw holes over a wall stud.

3.Mark the wall.

4.Position a wall spacer on each of the two wood screws provided, and insert the screws in the wall as far as they will go at the places you marked.

Note:

If you cannot locate a wall stud for one of the screws, use molly bolts or another type of hollow-wall fastener. Be sure to place the wall spacers on the screws before inserting them permanently.

✃

1.5inches (3.81 cm) center to center

✃

Page 114
Image 114
Lucent Technologies Transtalk 9000 manual Battery Charger Wall-Mounting Template